Olympic Step Renew revitalizes worn thermoplastic, acrylic, and fiberglass pool steps used in vinyl liner swimming pools with a durable high-solids epoxy finish.
Step Renew includes the cleaner, coating, patching compound, anti-slip silica, and application tools needed to restore old pool steps at a fraction of replacement cost.
Restore worn thermoplastic, acrylic, and fiberglass pool steps with a durable epoxy coating system.
Designed specifically for vinyl liner pool steps exposed to UV rays, chemicals, moisture, and seasonal weather.
The complete kit provides cleaner, patching materials, anti-slip silica, coating, and application tools in one package.
The high-hiding epoxy coating is designed to cover in one coat for faster completion.
Popular finish colors coordinate with a wide variety of pool liner and backyard styles.
Anti-slip silica is included for stair tread safety and additional traction.
Review Step Renew coating specifications, cure times, and coverage information before beginning your restoration project.
| Property | Step Renew |
|---|---|
| Technology | High Solids Epoxy Coating |
| Coverage | Enough material to coat one set of 8 ft. wide pool steps |
| Mix Ratio | 3:1 |
| Sheen | Gloss |
| VOC | Compliant everywhere |
| Dry Time | To touch in 4 hours at 75°F+ |
| Light Foot Traffic | 24 hours |
| Pool Fill Time | 3 days minimum |
| Working Pot Life | Approximately 1 hour |
| Cleanup Solvent | Olympic Epoxy Solvent No. 1109 |
Pool steps must be free of grease, algae, mildew, chemicals, and contaminants before coating.
Scuff sanding is required to create a uniform profile for proper coating adhesion.
The included Poxofill epoxy patching compound can be used to repair chips, cracks, and damaged areas before coating.
Proper repairs help ensure a smoother final finish and longer-lasting performance.
Review technical bulletins, instructions, and safety data sheets before starting your Step Renew application project.
Your Complete Pool Step Refinishing Kit
Pool steps are used in very difficult environments and over time show the wear and tear of general use and continuous exposure to sun, seasonal heat and cold, moisture, and pool chemicals. Don’t replace – Renew!
Olympic Step Renew provides a simple process to revitalize old and weathered thermoplastic and fiberglass pool steps used in vinyl liner swimming pools. The Step Renew kit contains the tools, the cleaner, and the coating needed to easily renew your pool steps and extend their useful life.
•Pool steps look new again at a fraction of the cost of replacement
•Complete kit provides needed materials in convenient one-stop format
•Simple prep and application – Finish your project in a few hours
•Epoxy Patching Compound for repairing damaged steps
•Durable finish provides years of performance and protection
•High-hiding formula covers in one coat
•Popular White, Blue and Gray finishes coordinate with varying pool schemes
•Anti-slip silica sand provided for tread areas to promote safety
Products
Complete and easy to use kit- finish your project in just a few hours! Tough, durable finish provides YEARS of performance and protection!
Product Details
Perfect for thermoplastic and fiberglass pool steps used in vinyl liner swimming pools. Don’t replace – Renew!
How To Use
To ensure a successful project, read and understand these instructions in their entirety before starting the Step Renew process.
JUST LIKE NEW - WITH STEP RENEW
OLYMPIC STEP RENEW COATING
Technology: High Solids Epoxy Coating
VOC: Compliant everywhere
Sheen: Gloss
Mix Ratio: 3:1
Coverage: Kit provides enough material to coat one set of 8 foot wide pool steps
Dry (Cure) Time: At 75°F or higher – to touch in 4 hours; to light foot traffic in 24 hours; to filling pool in 3 days.
Lower temperatures and/or higher humidity levels may extend these times.
Working Pot Life: One hour average
Solvent / Clean Up: Olympic Epoxy Solvent No. 1109