Patio Tones deck coatings are lightly textured, slip-resistant top coatings formulated for concrete pool decks, patios, and sprayed concrete surfaces.
Patio Tones provides a high-quality, low-cost way to improve the appearance of concrete pool decks and patio areas.
Because it is water-based, Patio Tones can be applied to wet concrete as long as it is not rolled through standing water or puddles.
Preview our Patio Tones color options below. On-screen colors are for general reference and may vary by display, lighting, texture, and application conditions.
Order a Color Card for the most accurate color selection.
Patio Tones helps restore concrete deck areas while adding a lightly textured, slip-resistant topcoat.
Lightly textured finish helps improve traction on concrete pool decks, patios, and walking areas.
Can be used over cracked or broken concrete that has been repaired, helping conceal substrate damage.
Clean application equipment with water immediately after use for easier cleanup.
Patio Tones is formulated for properly prepared outdoor concrete deck and patio surfaces.
Surface must be clean and free of grease, oils, dirt, loose material, and other foreign matter before coating.
Use this quick reference for key technical details before starting a Patio Tones coating project.
Sweep vigorously to remove loose material, then scrub with TSP or Olympic No. 910 Pool Washing Compound at a ratio of eight ounces to one gallon of water. Rinse immediately.
Acid wash with a 10% muriatic acid solution, rinse, then repeat the TSP wash to neutralize remaining acid before the final rinse.
Use a 1/2" nap roller cover on smooth surfaces and a 3/4" nap roller cover on rougher surfaces. Always follow the product label, technical bulletin, and safety data sheet before starting.
Choose Patio Tones Water-Base Non-Slip Coating for concrete pool decks, patios, and sprayed concrete surfaces.
Shop Patio Tones